Ness G1 Z-Wave Gateway (Smart Z-Wave control for your Ness D8/D16 systems)

Ness G1 Z-Wave Gateway (Smart Z-Wave control for your Ness D8/D16 systems)

$209.00
$209.00
$225.00
Sold out
Tax included.

 

Ness G1 Z-Wave Gateway works with Ness D8/D16 panels V6 or above to provide integrated Z-Wave control on D8/D16 events.

 Control Z-Wave devices such as lighting and smart switches by D8/D16 events – panel Arming / Disarming, Zone events, D8/D16 outputs state.

The free zComms app for Android and iOS provides Push Notifications on D8/D16 alarm events. You can even arm and disarm your panel and control outputs via the app.

 And if that’s not enough, get Video Verification within zComms from the optional Ness IP Z-Wave cameras. That’s smart!
  • Compatible with over 3,000 Z-Wave devices
  • Control up to 120 Z-Wave devices
  • Control up to 40 rooms, each room allows max of 120 devices
  • Control up to 60 scenes, each scene allows 6 events and 12 actions
  • Supports Amazon Alexa and Google Home
  • Supports plug & play IP Z-Wave
  • Allows alarm notification for each Z-Wave device and each scene
  • Plug & play by ID/password
  • Bundled with free Ness zComms App
  • Push notifications on iPhone/iPad and Android for device and scene events
  • Internal real time clock
  • Watchdog function to prevent system failure

 

 

 

Models Ness G1 Z-Wave Gateway
Power DC 5V, 1.5A
Processors RISC CPU
Network Interface Ethernet 10BaseT/100BaseTX, Auto-MDIX, RJ-45
Z-Wave Module Sigma Design 500 series module Tx RF Power -26 ~ 2 dBm. Range: 100 meters open site
921.42 MHz
Buttons One reset button, to factory default settings,
One WPS button for automatic WiFi setup
Indicators One LED for Internet connection status indication
One LED for Ethernet connection indication
One LED for Z_wave signal indication
Speaker Built-in 0.5W speaker for device inclusion/exclusion status indication
Installation Plug & play by ID/password.
Management and
Maintenance		 Management software Ness zComms for multi-gateway management,
Firmware upgrades via FTP
Supported Protocols IPv4, HTTP, TCP, ICMP, UDP, SNTP, FTP, DHCP, ARP, DNS, PPPoE, etc.
Accessories Included Power adaptor, RJ45 Ethernet cable, quick installation guide, ID/Password card.
App App Ness zComms for Android and iPhone/iPad
Alarm and Event Management Push notification on iPhone/iPad and Android devices.
Dimensions (HxWxD) 96 x 96 x 21 mm
Weight 129 g, incl. gateway bracket, excl. power adaptor
Approvals EMC - CE, FCC Part 15 Subpart B Class B Wireless RF - CE, FCC Part 15 Subpart C Power supply: CE, FCC, UL, EN 60950
Operating conditions 0-50 °C Humidity 20 – 80% RH (non-condensing)